Відео

Top card in your segment🖤

Windows? Do you make your own drivers like RME?

Just scored this brand new in box for 149 works amazing so versatile know what it is for and it is great i have tons of pedals that make this a perfect practice rig and can record using ym torpedo cab sims

Hi, a suggestion for ORIA desktop app: white noise by alt+clicking a single speaker (as coreaudio does already!). So you don't have to open any DAW just to check correct speakers assignments!

MIDI/OSC and/or EUCON compatibility for use with proper external control devices, as well as multi-subwoofer bass management and the ability to mix and match outputs between AES and Analog would make this a truly pro product. More flexibility is good! Until then it’s still a bit limited

Would be really handy for a future Atmos interface to have the e-arc hdmi outputs also to connect a sound bar. I would like to monitor via a sound bar also for this specific reason. It's good to have headphones to check due to the phantom centre channel is often missing and so it's always good to check on headphones for this reason as most people will be listening on headphones most of the time. Then a very common setup for home Atmos will be a soundbar. And I have seen many sound bars that do not have the rear channels and often reviewer say it really could do with those as they do well to replicate the rest of the speaker setup and not the rear... which is the opposite issue with headphones and feel I should take into account this when mixing in Atmos as this will become a very common setup for people as just one speaker is all the headache most people want to deal with. SO it would be good to have a e-arc output also so this can become completely doable. I personally would like there to be a rendition that is both Atmos monitoring and full recording centric, currently it does have minimal recording capabilities and enough for myself now but would be great to get all in one as this is so good at doing things without headaches, it just works and is already perfect in it's own right. I wanted to ask a question before I pull the trigger and this is due to current idea for a monitor setup: is it possible to send the centre channel out of two outputs? I want to avoid having to use a signal splitter. Thank you, and thanks from the world of Atmos mixing for this much cheaper than any other interface while also working better and easier with ten fold less headaches.

I bought it today. I made the connections. Rode nt1 5th. with headphones. I cannot record audio. When you touch the microphone, a sound is heard. 48 v is on. What setting should I make? My microphone connected via xlr input

Still waiting on Windows Sonarworks integration. Any ETA on that?

Got one and love it love it love it. Its the boss. One or 2 things missing but dam she's hot.

is it just normal for the master mix to show up as red? i have windows at a 100 like in the video but it feels like i'm doing something wrong when all i'm doing is listening to music at and it's looking like it's clipping the audio entirely.

how can i record my vocals,where are they saved?

Is it possible to listen to the master output on two pairs of monitors simultaneously connected to the four line outputs, plus a subwoofer connected to one of the headphone outputs? Can this routing be done via software? Thanks for the clarification!

3:59 This is at least the 4th time I'm coming back to this video and I still can't figure out why the ID44 has the cheaper and older AKM converters like the ID4. And why does the 880 and 800 has DIFFERENT Burr Brown converters? Why is better? What about the MKII that I got? Does it have the Same Burr Brown converters as the 880 or the 800? I really like my ID14 MKII but this is so confusing The console sounded the best and I can only hear it with my newish monitors.

Inspirational <3

Love this

I use them anywhere I can...! learning their differing characteristics and placing them accordingly! Wonderful things....

Prefer the sound of old one. I get that the new one would cut more.

Is there a way to capture the output of a DAW and input it into Skype using either the ID4 v2 or Evo 4? I want to add some VST compression and reverb to a Mic stream. I own several daws so this seems the way to go. So the path would be Mic, Daw input, VST effect, Daw output, Skype input.

But... why wouldn't you use the same head? Of course it sounds different it's a different material, different brand etc...

Isnt the new one uncoated? The sound would be different since they arent the same type of head

bought sucked so it doesnt make that much of a difference

Is this compatible with Davinci Resolve?

Hi Audient, Is it possible to use Audient Asio Driver inside OBS or ZOOM for online keyboarf tutorial? I want to capture the audio from my DAW with OBS. Most audio interface needs 3rd plugin for it. The only interface that can load its ASIO driver inside OBS or ZOOM, only Steinberg 22c as far. Please answer, TIA

Game audio professional. Just received my Oria this week. Disappointed that I cannot export multichannel and import to the Oria on Windows. The messaging is clear that only Left and Right channels are calibrated but the rest are not. I have done 2 40 minute measurements for 5.1. You should clearly state Windows was is not fully supported yet.

Quisiera saber si puedo manejar el volumen de las salidas principales y secundarias por separado ya que ahora mismo si subo las perilla de salida se me sube el volumen de los dos pares de monitores al mismo tiempo.

Hello, I have a question, I connect a focusrite to my id24 through adat with 2 optical cables, the software turns the light green but no audio enters any of the 8 digital channels, do I have to configure something from the Audient software? Thank you

In some cases it is good to make OH's tighter than hard wide panning, imagine real concert stage for this purpose.

I would advice folks to stay away from purchasing any Audient products since their online product registration is not working. Tried registering a product multiple times and kept receiving a message that said product wasn't registered. I even had to reset my password at one point.👎🏾🤨

I have a question, when I move the volume knob of the headphones, nothing is indicated with the LEDs that surround the knob. Is this normal or does nothing light up there?

Noooo, flip the drums around, make it audience-perspective!

Do I understand correctly that the line 3/4 can be used for reamping then?

What is if have a left handed drummer? That their perspective is the right handed drummer’s audience perspective. 😂

Hello, my id4 is not showing up as a device on my computer (windows 11)

Can someone tell me why my NT2 keeps picking up a buzzy sound through the ID4? It has nothing to do with the interface itself, but i made so much songs, until last night? I mean wtf im going crazy cause of this bad frequencies?!

I just got the evo 8. I feel like the headphone monitoring is a bit low. I tested it on beyerdynamics 770 studio 80 ohm and the audio technica ath-m50 as well and get the same results. Not sure what I'm doing wrong, any suggestions?

I think on if some rock type of instruments will be added if pop or more tame then off.

I just purchased id4 audio interface. But I can't record my voice and guitar at the same time. Could you guide me? Thank you

Chingon 🎉

Will it work with iPad 10 generation if fully bus powered

How can I switch between studio monitors and headphones in ID22? I have sound only on my headphones and not monitors. I'm going crazy here. Can somebody help me please?

Hello Audient's, im about to get this interface, but is there any different between input gain of id4 and id14 mk2?

wow marco i neeed someone make the music to me when i'm singing

Experience in spatial audio will also become an important skill in the future of immersive video for the Apple Vision Pro + Blackmagic URSA Cine Immersive camera.

Love her voice, both in her rock and pop songs

Thinking of getting one, but please someone answer this: How do I mute my XLR microphone on the fly? Like, can't there be a function assigned on the ID button? Is talkback a thing on the ID4? Perhaps I am missing somehting or there is no way to momentarily mute the mic input on the ID4?

What neck pickup is that?

I do love me a ringy snare tho!

Why you spend time with pro tools…. Other daws just work plug n play…. There’s nothing pro about these tools anymore,,, Great interface by the way. Cheers

HI, I just bought an evo 8 and the screen reader for the app is defaulted to on. I looked up the knowledge base, and the ctrl shift - command doesn't turn down the narration volume. The narrator is completely turned off in windows. I can't see how to turn the narration off in EVO app. Any help is appreciated, thank you.

iOS/iPadOS support?